How to connect a Star WebPRNT receipt printer
Use Star WebPRNT when a supported Star receipt printer is available over the network.
Connect the printer
- Connect the printer to the same reachable network as the register.
- Open Settings > Devices & Hardware.
- Disable embedded PDF receipt mode when it is enabled.
- Enable Star WebPRNT.
- Enter the printer host name or IP address.
- Save the settings.
- Print a controlled test receipt.
If it does not print
- Confirm the printer is powered on and online.
- Verify the host or IP address.
- Confirm the register can reach the printer network.
- Check the selected paper size.